Ọnlaịnụ Turbidity Analyzer bụ ngwa nrụpụta na ngwaọrụ njikwa turbidity dị n'ịntanetị- ọkwa. Enwere ike ịkwado ya na nyocha turbidity dị n'ịntanetị iji nweta ezigbo oge na nha na-aga n'ihu nke mmiri turbidity.

Ihe nyocha a na-akwado ezigbo turbidity na ngosipụta okpomọkụ yana nkwụghachi okpomọkụ akpaka maka izi ezi dị elu. Ọ na-enye RS485 MODBUS -RTU nzikọrịta ozi, 4-20mA analọgụ mmepụta na njikwa ọsọ ọsọ maka oti mkpu ma ọ bụ dosing njikọ.

Ọ na-egosipụta ngbanwe dị mfe, nchekwa ike{0}gbanyụọ data, mgbochi siri ike{1}} nnyonye anya yana nchedo IP65, dabara maka ọrụ kwụsiri ike ogologo oge na gburugburu ngalaba mmepụta ihe.

A na-eji ya eme ihe n'ọtụtụ ebe na osisi mmiri ọṅụṅụ, mgbata mmiri mmiri, aquaculture, nlekota mmiri mmiri, mmiri usoro mmepụta ihe na usoro ọgwụgwọ mmiri.

Ụkpụrụ ọrụ

Na-eji ụkpụrụ nchọpụta ọkụ gbasasịa ogo 90. Igwe ọkụ na-agbapụta ìhè, na ihe ndị a kwụsịrị na mmiri na-agbasa ìhè. Onye nchọpụta ahụ na-enweta mgbaàmà ọkụ gbasasịa ma gbanwee ya na uru turbidity, na-akwụ ụgwọ okpomọkụ na-akpaghị aka iji hụ na data ziri ezi.

Njirimara Turbidity Analyzerkey n'ịntanetị

1.Nchọpụta ngwa anya infrared, mgbochi{1} ọkụ, nkwụsi ike siri ike.
2.Automatic okpomọkụ nkwụghachi ụgwọ, ime mgbanwe na mgbagwoju mmiri okpomọkụ mgbanwe.
3.Standard RS485 nkwurịta okwu, mfe njikọ na PLC na SCADA.
4.Optional akpaka nhicha ọrụ, n'ụzọ dị irè belata rụrụ arụ mmezi.
5.Industrial mgbochi - ụlọ corrosion, dabara maka nsị na mmiri ọkụ.
6.Wide nha nso, ọdabara maka mmiri dị ọcha ruo elu{1}} mmiri mkpofu mmiri.

Ngwa ngwaahịa

Oke	Nkọwapụta
Mkpebi	Ntugharị: 0.01 mg/L Okpomọkụ: 0.1 ogo
izi ezi	Ntugharị: 2% Okpomọkụ: ± 0.2 ogo ± 1 ọnụọgụ
Okpomọkụ na-arụ ọrụ	0 ~ 50 ogo
Okpomọkụ nchekwa	-10-70 degrees
Ngosipụta	LCD 240 × 160 ntụpọ ntụpọ / LCD 256 × 128 ntụpọ matrix
Mpụta 1 ugbu a	4 ~ 20mA dịpụrụ adịpụ, nhazi maka pH / ORP / TEMP, max load 500Ω
Mpụta 2 ugbu a	4 ~ 20mA dịpụrụ adịpụ, nhazi maka pH / ORP / TEMP, max load 500Ω
RS485 interface	MODBUS RTU protocol
Njikwa	Mmepụta kọntaktị: GBANYE/ Gbanyụọ, 240VAC 3A Max Ntọala: Ebe njikwa HI/LO nwere onwe abụọ
Ntọala nhicha	Otu mmepụta kọntaktị njikwa, NA 0-9999 sec / Gbanyụọ 0-999.9 awa
Ogo nchekwa	IP65
Ịnye ọkụ	100V ~ 240VAC ± 10%, 50/60Hz, 5W
Usoro ntinye	Mgbidi -Edokwasịrị / Pipeline{1}Edokwasịrị / Ogwe{2}Adọkwasara
Akụkụ nkeji	96 mm × 96 mm × 125 mm (H×W×D)
Mbelata akụkụ	93 mm × 93 mm (H×W)
Ibu	0,8 n'arọ

Nkọwa nka nka

Oke	Nkọwa
Voltaji na-arụ ọrụ	DC 9–28V
Oriri Ike kacha elu	5W
Ụzọ nchọpụta	Usoro ịgbasa ọkụ 90 ogo
Isi Iyi Ìhè	660nm laser
Oke nso	0–1/20/100/2000 NTU
Mkpebi	0.0001 NTU<1 NTU), 0.001 NTU (≥1 NTU)
Oke nchọpụta dị ala	0.005 NTU
izi ezi	0–100 NTU: 2% ma ọ bụ ± 0.02 NTU (nke ọ bụla ka ukwuu); 0-2000 NTU: ± 0.5 NTU (nke ọ bụla ka ukwuu) (dabere na ọkọlọtọ Formazin na ogo 25)
Okpomọkụ na-arụ ọrụ	-5 ruo 45 degrees
Ụdị ọrụ	Mgbapụta agbadoro - site n'ụdị
Nrụgide nlele	Ọkọlọtọ: Ihe na-erughị ma ọ bụ hà nhata 0.6 MPa; Omenala: Ihe na-erughị ma ọ bụ hà nhata 1.0 MPa ma ọ bụ karịa
Ọnụego Nlereanya	100-1000 ml / min (atụ aro: 500 ml / min)
Ihe eji eme ụlọ	ABS
Mpụta dijitalụ	RS485 Modbus protocol (njikọ mgbochi mmiri 4-isi)
Mmepụta analog	Ọkọlọtọ 4–20mA (njikọ mgbochi mmiri 6-isi)
Akụkụ (tubing 6mm)	192mm × 125mm × 78mm (W × H × D, gụnyere akwa akwa)
Akụkụ (tubing 10mm)	200mm × 131mm × 78mm (W × H × D, gụnyere akwa akwa)